Percy's Pepperbox
3D printing files for the pepperbox "The List" that Percy uses in the animated tv show The Legend of Vox Machina.
These files were made by me, and are for a prop replica with a barrel that rotates, and hammers that move, when the trigger is pulled. The prop consists of 19 printed pieces, as well as 4 bearings (2x2 different sizes), and a few springs. This purchase is only the files, no physical objects are included. There are two barrel files, one with names and one without. The Hammer and Grip files need to be printed once as is, and once mirrored along their flat faces.
Inside the zipped folder is a read me txt file that has a link to the youtube video that goes through the build and best practices for printing. For best results you will need both resin and fdm prints.
2x skateboard bearings (size 608, bore of 8mm)
2x larger bearings (bore of 25mm, exterior diameter of 37mm, thickness 7mm)
2 tension springs, and 1 compression spring.
The purchase of this file is for personal use only and does not entitle printing for commercial purposes.
3D printing files for the pepperbox "The List" that Percy uses in the animated tv show The Legend of Vox Machina.
These files were made by me, and are for a prop replica with a barrel that rotates, and hammers that move, when the trigger is pulled. The prop consists of 19 printed pieces, as well as 4 bearings (2x2 different sizes), and a few springs. This purchase is only the files, no physical objects are included. There are two barrel files, one with names and one without. The Hammer and Grip files need to be printed once as is, and once mirrored along their flat faces.
Inside the zipped folder is a read me txt file that has a link to the youtube video that goes through the build and best practices for printing. For best results you will need both resin and fdm prints.
2x skateboard bearings (size 608, bore of 8mm)
2x larger bearings (bore of 25mm, exterior diameter of 37mm, thickness 7mm)
2 tension springs, and 1 compression spring.
The purchase of this file is for personal use only and does not entitle printing for commercial purposes.
3D printing files for the pepperbox "The List" that Percy uses in the animated tv show The Legend of Vox Machina.
These files were made by me, and are for a prop replica with a barrel that rotates, and hammers that move, when the trigger is pulled. The prop consists of 19 printed pieces, as well as 4 bearings (2x2 different sizes), and a few springs. This purchase is only the files, no physical objects are included. There are two barrel files, one with names and one without. The Hammer and Grip files need to be printed once as is, and once mirrored along their flat faces.
Inside the zipped folder is a read me txt file that has a link to the youtube video that goes through the build and best practices for printing. For best results you will need both resin and fdm prints.
2x skateboard bearings (size 608, bore of 8mm)
2x larger bearings (bore of 25mm, exterior diameter of 37mm, thickness 7mm)
2 tension springs, and 1 compression spring.
The purchase of this file is for personal use only and does not entitle printing for commercial purposes.